|Defoaming Performance||15 Seconds maximum at 50 R.P.M.|
|Compound||Activated Dimethyl Polysioxane|
|Stability||Maximum 5% separation after 15 minutes at 1600 R.P.M|
|Sp. Gravity||0.975 to 0.010 @ 25 Deg C|
|Refractive Index||1.402 to 1.406 @ 25 Deg C|
|Free Acid||0.025 to 0.04|
|Suitable Diluent||Aliphatic, Aromatic and Chlorinated Solvents|
It is widely used as a versatile Defoamer, in both general industrial applications. In medical and pharmaceutical applications, the requirements for this chemically inert silicone defoamer is unique and exacting.
How To Use:
Amount is effective in very low concentrations. 1 to 50 gms per ton of foamer are sufficient to suppress most foam. For any new industrial application, the user may start with a concentration of 20 gms per ton, then increase or decrease this concentration until most economical use level, is established.
Direct Application As Supplied:
In some applications, it may be wiped on process equipment to limit foaming level. In bottle filling machine, it is applied to the nozzles to knock down foam as it rises in the neck of the bottle, Similarly, a wiped on a application on the rim of processing vats prevents foam overflows. It may be wiped on a screen, which is then suspended over the surface of the foamer. Whenever the foam rises too high, it contacts the screen and is broken.
In most industrial applications, it is diluted with solvent, then added to foamier; dispersions may be made in Butyl Alcohol, Toluene, Xylem, Kerosene, Ethyl Ether, Chloroform and many other Solvents. Comparative tests using different diluents should be run if it is desirable to determine the most suitable and economical diluent to use for any particular process or product. Freshly prepared dispersion should be used for maximum efficiency.
|Adhesives||Paper coating processes.|
|Agar.||Paper production processes.|
|Cutting Oils.||Propane Gas.|
|Detergents & soaps.||Rubber Lattices.|
|Fermentaion processes.||Resins & Varnishes|
|Filtration Processes||Salt Solutions.|
|Unit Pack Size||200 L|
Our Treadmill Machine Oil optimizes the performance of your treadmill. It reduces friction and helps the belt to run smoothly without any noise. It ensures the proper function and prolongs its life because of 100% silicone, and its excellent lubricating qualities. Our silicone treadmill machine lubricant oil is odorless, colorless, clear, non-sticky and transparent with no petroleum components. It’s eco friendly and does not harm our body.
Treadmill Machine Oil is mainly used for lubricating between treadmill belt and deck. It improves your daily workout.
Treadmill requires Non-petroleum, Non-sticky, 100% silicone base oil with multi adjustable viscosity. It maintains the running belt while protecting the motor with this specially developed lubrication oil. In a treadmill, belt and the deck are the most critical and delicate parts and requires proper caring. It’s very important to maintain the life of treadmill.
Packaging Size: 1, 5, 10, 20, 35, 50, 100 L
|Packaging Size||50 L|
Cutting Oil is a type of lubricant used for machining and metalworking processes. It is also known as a lubricant, coolant, cutting fluid and cutting compound. It forms a milky emulsion with water and contains rust inhibitor to impart anti-rust, anti-corrosion properties and a biocide to prevent bacterial growth in the emulsion and provides longer emulsion life. It gives excellent surface finish and extended tool life. This oil has superior cooling and lubricating properties which impart excellent surface finish and minimises tool wear. For stable emulsion, oil should be added to water.
You can use cutting oil for threading machine operations. It is also good for light drilling and hacksaws.
Another function of cutting oil is for adding lubrication between the cutting tool and the cutting material. Cutting oil acts as a lubricant to prevent friction and reduce the heat that is generated between the objects being cut.
It Can be used as specific lubricants for both manual and machine metal working operations. Used for sawing, drilling, turning or thread cutting with all types of metals
|Vehicle Type||Heavy Vehicle|
|Packaging Size||30 L|
|Temperature||-40 Degree C to 250 Degree C|
We are one of the renowned manufacturers of Chain Oil (High Temperature) used for different type of conveyor oven chair of srant m/s PVC coating m/c, paper plant and hardboard plant. We manufacture these chain oils by using high-grade antioxidant, anti-rust viscosity improver, anti were and fire retardant.
Area of Applications:
|Appearance||Crystal Clear Fluid|
|Viscosity||50 Cst (mm2) @ 25 Deg C|
|Dielectric Breakdown Voltage||50kV|
|Permittivity||2.7 @ 25 Deg C, 50Hz|
|Dissipation Factor||0.0001 @ 25 Deg C, 50Hz|
|Flash Point||300 Deg C (open cup)|
|Fire Point||370 Deg C (open cup)|
|Flash Point (open cup)||300 deg C|
|Fire point (open cup)||370 deg C|
|Thermal Conductivity||0.151 W (m.k.)|
|Oxygen index||21.4 TDLOI|
|Coefficient of Expansion, cc/cc/degC||10.55 x 10-4|
|Packaging Size||30 L|
|Grade Standard||Technical Grade|